Specifiche
| CPU Support | - Socket 478 for Intel® Pentium® 4 / Celeron® processor up to 3.06 GHz and greater with 400/533 MHz FSB
- Supports Hyper-Threading technology
- Supports Intel® Pentium® 4-M processor up to 2.4 GHz and greater with 400 MHz FSB
|
| Main Memory | - 2 x 184-pin DIMM, up to 2 GB Unbuffered Non-ECC DDR 200/266/333 SDRAM memory
|
| Chipset | - Intel® 845GV
- 1 x Intel® 82801DB I/O Controller Hub (ICH4)
|
| BIOS | - Award System BIOS
- Plug & Play support
- APM (Advanced Power Management) support
- ACPI (Advanced Confi guration &Power Interface) support
- 4 Mbit flash ROM
|
| On-board LAN | - 2 x Intel® 82551QM 10/100 Fast Ethernet controllers for PEAK 715VL2-HT
- Full duplex compliance with IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE 802.3y, IEEE 802.3ab
- 2 x RJ45 with LED connector
|
| Display | - Intel 82845GV chipset integrated VGA controller
- 64 MB of VGA system memory
|
| I/O Interface | - Built-in ITE 8712F-A Super I/O chipset
- 4 x USB 2.0 port
- HDD: 2 x 40-pin connector. Ultra DMA 33/66/100 support
- Serial port: 2 port with 2x5 pin header
- Parallel: 1 x 26-pin connector, supports EPP/ECP
- FDD: 1 x 34-pin connector
- Video: 1 x 15-pin CRT connector
- PS/2 Keyboard/Mouse: 1 x 6-pin Mini-DIN connector
- External keyboard: 1 x 5-pin connector
- 1 x Buzzer
- GPIO (4 in, 4 out)
- I2C: 1 x 2-pin header
- Reset SW: 1 x 2-pin header
- IDE active LED: 1 x 2-pin header
- ATX power SW: 1 x 2-pin header
- Power cable connected to backplane board to support ATX power on function: 1 x 3-pin power header
- Additional power source input: 1 x 4-pin header
- I/O On Bracket: 1 x VGA DB-15 connector, 2 x RJ45 Ethernet LAN port, 1 x Mini-DIN for Keyboard/Mouse
|
| Watchdog Timer | - Programmable Watchdog timer from 1 ~ 128 seconds
|
| On-board RTC | - On-chip RTC with battery back up
- 1 x External Li-Ion battery
|
| Disk On Module | - HDD: 2 x 40-pin connector; Ultra DMA 33/66/100 support
- IDE active LED: 1 x 2-pin header
|
| ISA Support | - ITE 8888F x 1 PCI to ISA Bridge
- Provides 64 mA high driving capability to maximize ISA signals and supports up to 20 ISA cards on the backplane ISA Slot
|
| System Monitor | - Derived from Super I/O ITE 8712F-A to support system monitor
- 8 voltage (For+1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and Vcc 5 V standby)
- 2 fan speed (one is for CPU, one is for system)
- 2 temperature (one is for internal CPU, one is for external system)
|
| Power Input | - Power source from backplane through PCI/ISA golden finger
- Supports both AT or ATX power supplies
- +3.3 V is converted from +5 V and not directly from backplane or power supply
- +5 Vsb (standby power) is connected from backplane through 3-pin connector
- 4-pin +12 V power input connector
|
| Power Requirements | - Power supply maximum consumed power on SBC:
- 5 V: 4 A
- 12 V: 6.5 A
- 3.3 V: 0.6 A
- 5 Vsb: 0.5 A
|
| Dimensions | - 338.58 mm (L) x 122 mm (W) (13.3" x 4.8")
|
| Environment | - Operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications | |