Specifiche
| CPU Support | - Single 478 uFCPGA/479 uFCBGA socket
- Supports Intel® Pentium® M: 1 or 2 MB L2 Cache, 400 MHz FSB, speeds up to 1.8 GHz
- Supports Intel® Celeron® M: 512 KB or 1 MB L2 Cache, 400 MHz FSB, speeds up to 1.5 GHz
|
| Main Memory | - 2 x 184-pin DDR DIMM
- Supports unbuffered non-ECC DDR memory up to 2 GB
|
| Chipset | - Intel® 852GM
- Intel® 82801DB I/O Controller Hub (ICH4)
|
| BIOS | - Award System BIOS
- Plug & Play support
- Advanced Power Management and Advanced Configuration & Power Interface support
- 4 Mbit flash ROM
|
| On-board LAN | - 2 x Intel® 82551ER 10/100 Fast Ethernet
- 2 x RJ45 with LED
|
| Display | - Intel® 852GM integrated dynamic video shared memory, 64 MB max adjusted by OS
- 1 x D-sub 15-pin VGA port
- Resolution: Up to 1600 x 1200 for CRT or up to 1280 x 1024 for TFT
- Internal LVDS: Supports 18/24-bit single pixel or 18-bit dual pixel LVDS panels (resolution up to 1280 x 1024)
- Dual display: Simultaneous scan- CRT + LVDS LCD, Dual View- CRT+ LVDS LCD
- CCFL connector for LCD panel backlight: Provides +12 V or +5 V for backlight inverter
|
| I/O Interface | - Serial port: 2 port, with 2x5 box header (optional COM2 RS-232/422/485 by switch for Peak 736VL2 only)
- USB 2.0 port x 4 through 1x6 box header
- HDD: 2 x 40-pin connector, support ultra ATA 100/66/33
- Disk on Module: 1 x 2-pin power connector for DOM
- Parallel port: 1 x 26-pin connector
- Floppy: 1 x 34-pin connector
- PS/2 Keyboard/ mouse: 1 x 6-pin Mini DIN Connector
- 1 x 5-pin connector for external KB/ Mouse
- Digital I/O port: 4 In and 4 Out with TTL level interface
- 1 x on-board buzzer / 1 x IrDA Header / 1 x 2-pin header for reset
- 1 x 5 pin for key lock, 1 x 2-pin for power LED, 1 x 2-pin for HDD Power LED
- 1 x 3-pin fan JST
- I/O On Bracket: 1 x VGA DB-15 connector, 2 x RJ45 Gigabit Ethernet LAN port, 1 x Mini-DIN for Keyboard/Mouse, 4 x USB 2.0 ports
- (Optional) CF socket/ Disk on chip
|
| Watchdog Timer | - 1 ~ 128 second time-out intervals
|
| On-board RTC | - On-chip RTC with battery back up
- 1 x External Li-Ion battery
|
| Disk On Module | - HDD: 2 x 40-pin connector suport ultra ATA 100/66/33
- Disk on Module: 1 x 2-pin power connector for DOM
|
| ISA Support | - 1 x ITE 8888F PCI to ISA Bridge
- Provides 64 mA to support max. 20 ISA slots on the backplane
|
| System Monitor | - System monitor controller derived from IT8712
- 6 voltage (For +3.3 V, +5 V, +12 V, Vcore, +5 V Standby, and +3.3 V Standby)
- 2 fan speed (For CPU and system)
- 2 temperature (One for CPU, one for system)
|
| Power Input | - Power source from backplane through PCI/ISA golden finger
- Supports both AT or ATX power supplies
- +3.3 V is converted from +5 V and not directly from backplane or power supply
- +5 Vsb (standby power) is connected from backplane through 3-pin connector
- 4-pin +12 V Power Input Connector
|
| Power Requirements | - CPU/Memory: 1.7 GHz/1 GB
- 5 V: 5.25 A
- 12 V: 0.15 A
- 3.3 V: 0 A
- 5 Vsb: 0.05 A
|
| Dimensions | - 338.58 mm (L) x 122 mm (W) (13.3" x 4.8")
|
| Environment | - Operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications | |