Share this page

EBC 310

3.5" ECX Intel® Atom™ E640 1.0GHz CPU, On-board DDR2-1GB
  • Main Feature
  • Support Intel® Atom™ E600 Series Ultra Low Power Consumption SoC
  • On-board DDR2 1GB Main Memory
  • Support VGA/LVDS Display
  • Support Video Decode (MPEG2, MPEG4, H.264, VC1, WMV9)/ Encode (MPEG4, H.264)
  • Two Gigabit Ethernet
  • One CAN Controller
  • 3x COMs, 6x USB 2.0, 2x SATA
Add to Inquiry
Datasheet(PDF)
CPU Support On-board Intel® Atom™ E640 1.0GHz SoC (System-On-Chip)
Main Memory On-board DDR2 800-MHz 1GB, Non-ECC and Un-buffered
Chipset Intel® EG20T (PCH)
BIOS AMI BIOS Plug and play support
On-board LAN 1 x Intel® 82574L Gigabit Ethernet controller 1 x Realtek 8211CL Gigabit Ethernet controller Support Boot from LAN and Wake on LAN 2 x RJ45 with LED
Display Intel® Atom™ E600 series integrated graphic engine, support video decode (MPEG2, MPEG4, H.264, VC1, WMV9)/ encode (MPEG4, H.264) Analog VGA interface: 1 x DB15 VGA port, resolution up to 1280 x 1024 LVDS interface: support Single 18/24-bit LVDS channel, resolution up to 1280 x 768
Audio Realtek ALC886 CODEC for High Definition 1 x Mic-in and 1 x Line-out pin header
Expansion 1 x Mini-PCIe socket
I/O Interface Serial port: 3 ports 1 x RS232 DB9 Connector (COM1) 1 x RS232 with 10-pin box header, 2.0mm pitch (COM3) 1 x RS232/422/485 (COM2) with 10-pin box header, 2.0mm pitch USB 2.0: 5 ports
2 ports with USB 2.0 connector
2 ports with 2 x 2-pin header, 2.54mm pitch
1 port supports USB DOM CAN:
Integrated CAN 2.0 Controller supporting IEEE1588 over CAN
External CAN Bus Driver – TJA1050
2 x 2-pin header, 2.54mm pitch 8 x GPIO, 10-pin pin header, (GPI 0~3 and GPO0~3) with TTL Level (0/5 V) On-board Power LED and HDD Active LED Pin Header 1 x 4-pin fan connector (for CPU) 6-pin JST connector for PS2 Keyboard/ Mouse On board Buzzer/ SMBus2.0/ Reset/ On & Off switch button
Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)
Storage 2 x SATA connector (support 1 x SATA DOM)
System Monitor Monitoring of 5 voltages and 2 temperature 5 voltages (12, 5, 3.3, VNN, Vcore) 2 temperature (CPU, system)
On-board RTC On-chip RTC with battery backup 1 x External Li-Ion battery
Power Input Support AT and ATX mode (ATX as the default)
Power Requirements Power requirement: +12V DC Input One 4-pin power connector
Dimensions 3.5" ECX form factor 146mm (L) x 105mm (W) (5.7" x 4.1")
Environement Operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: Operating 10% to 90%, non-condensing
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!