Share this page

EBC 353

3.5" ECX On-board Intel® Atom™ Processor D2550 1.86GHz with 24 bit LVDS/Gigabit LAN, mini-PCIe/PCI-104
  • Main Feature
  • Onboard Intel® Atom™ processor D2550 1.86GHz CPU
  • Intel® NM10 Express chipset
  • One 204-pin SO-DIMM socket supports up to 4 GB DDR3
  • 800/1066 MHz SDRAM
  • Display: VGA & DVI-D & LVDS (1 x DF13 20-pin 18/24-bit Single channel)
  • 1x Mini-PCIe
  • 1x PCI-104
  • 2x Intel® 82574L PCI Express Gigabit Ethernet
  • 2x SATA
  • 6x USB, 4-in/4-out GPIO, Mic-in , Speak out
  • Serial port: 3x RS232, 1x RS232/422/485 port
  • Support AT/ATX mode and single +12 Vdc input
Add to Inquiry
Datasheet(PDF)
CPU Support Intel® Atom™ processor D2550 1.86GHz CPU
Main Memory One 204-pin SO-DIMM socket supports up to 4 GB DDR3 800/1066 MHz SDRAM
Chipset Intel® NM10 Express chipset
BIOS AMI BIOS Plug & Play support Advanced power management Advanced configuration & power interface 8M bits SPI ROM
On-board LAN 2x Intel® PCI Express Gigabit Ethernet Support boot from LAN (PXE) 2x RJ45 with LED
Display Intel® Atom™ processor D2550 integrated 3D graphics engine, which enhances Gfx & video, support DX*10.1, OpenGL 3.0 , and Full HD decode (MPEG2,VC1,AVC,H.264), delivers sophisticated graphics for large display applications, supports dual independent displays at graphics base frequency up to 640MHz, and provides multi-options for high-resolution displays Analog VGA interface:
1x VGA within DVI-I connector
Resolution up to 1920x 1200 75Hz DVI interface:
1x DVI-I connector
Resolution up to 1920x 1200
 LVDS interface:
Single (24bit) LVDS panel, resolution up to 1440 x 900 DF13 20-pin
LVDS connector for internal connection CCFL interface:
1x CCFL for LCD Panel Backlight Inverter
Audio Realtek ALC886 CODEC for High Definition 1x Mic-in and 1x Line-out pin header
Expansion 1x Mini-PCIe 1x PCI-104
I/O Interface Serial port: 4 port
COM1 support RS232 with DB9 connector
COM2 support RS232/422/485 with 10-pin box connector
COM3, 4 support RS232 with 10-pin box connector USB 2.0: 6 ports
2 ports edge connector
4 ports by 2.0mm JST connector 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V) On-board power LED and HDD active LED pin Header 1x 4-pin fan connector (for CPU) 1x keyboard/mouse pin header On board buzzer/ SMBus2.0/ reset SW/ on & off switch button
Edge I/O Interface 1x DVI-I connector 1x COM1 support RS232 with DB9 connector 1x dual stack USB connector 2x RJ45 with LED connector
Watchdog Timer Watchdog timeout can be programmable by software from 1 second to 255 seconds and from 1 minute to 255 minutes (tolerance 15% under room temperature 25°C)
Storage 2x SATA port
System Monitor Monitoring of 4 voltages and 2 temperatures 4 voltage (Vcore, +12V , +3.3V , 5V) 2 temperatures (CPU, system) 1 fan speed detection
On-board RTC On-chip RTC with battery backup 1x external Li-Ion battery
Power Input Support AT and ATX mode
Power Requirements Power requirement: +12V DC input One 4-pin power connector
Dimensions 3.5” ECX form factor/ 146mm (L) x 105mm (W) (5.7”x 4.1”)
Environment Operating temperature: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: operating 10% to 90%, non-condensing
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!